- How loud is the SUNAMI?
- How long does it take to install the SUNAMI?
- How does the SUNAMI trigger the blow off valve sound?
- Will the SUNAMI work on any vehicle?
- What type of warranty does the SUNAMI come with?
1. How loud is the SUNAMI?
The SUNAMI is as loud as it
should be to simulate the closest sound of a blow off valve.
The SUNAMI
comes with
a volume control knob, which may be used to set
the volume to your desired level. The factory setting
is
at the
highest volume and is ideal for all applications.
Remember, you
don’t want the volume level to be too high.
If we recorder the sound onto the memory chip
at a higher
volume,
you will experience a bit of distortion as well
as an unrealistic image. After installation,
ask a friend
to
drive the SUNAMI
equipped vehicle, while you are standing on the
side of the road. By doing so, you will know
exactly what
your
vehicle sounds like to the outside world.
[TOP] 2.
How long does it take to install the SUNAMI?
It will take an average
of 45 minutes to install the SUNAMI. The wiring is
very simple because there
are only
two wires which need to be connected to the vehicle – the
red, positive, wire and the black, negative, wire. The
rest of the time is spent on running two pairs of wires
through the firewall and into the engine compartment.
One pair will be connected to the sirens and the other
pair will be connected to the vacuum pressure switch.
Please read the instructions
page for exact installation
procedures.
[TOP] 3.
How does the SUNAMI trigger the blow off valve sound?
The SUNAMI may be triggered
either manually or automatically. The override push
button, which is installed inside the
vehicle, will the trigger the blow off valve sound every
time it is pressed. You may trigger the sound once every
five seconds, however. In another words, you cannot trigger
the blow off valve sound twice within five seconds with
the manual override pushbutton. The SUNAMI may also be
triggered automatically with the supplied vacuum pressure
switch. This switch is highly sophisticated and made
with precision. Once the vacuum switch is tuned exactly
to your liking, the SUNAMI will trigger the blow off
valve sound every time you reach the set boost level
and slightly lift your foot off the gas pedal; just like
a real turbo equipped vehicle. After installing the vacuum
pressure switch, you must “learn” the characteristics
of your individual vehicle, and “feel” the
moment you would like to trigger the SUNAMI.
[TOP] 4.
Will the SUNAMI work on any vehicle?
Yes, the SUNAMI will fit
any vehicle equipped with vacuum hoses. Almost every
single vehicle
has multiple vacuum
lines. Please read the instructions
page on how to
install the vacuum switch.
[TOP] 5.
What type of warranty does the SUNAMI come
with?
The SUNAMI
comes with a 90-day manufacturers warranty against
any electronic and solid
parts defect. Due to
the extensive electronic nature of the SUNAMI, Wallace
Mfg., Inc. will not accept returns unless the unit
is damaged during shipping or if the unit
malfunctions within
90-days from the delivery date. Make sure to listen
to the blow off sound available at www.sunamiturbo.com before
ordering.
[TOP]
|
